Quiero compartir un post realmente muy interesante que encontré publicado en www.linux.com que apesar de estar en inglés se entiende muy bien. En el post se explica muy detalladamente como recuperar el inicio de GRUB cuando aparece la consola de Grub. Les dejo el post original...
How to Rescue a Non-booting GRUB 2 on Linux
Once upon a time we had legacy GRUB, the Grand Unified Linux Bootloader version 0.97. Legacy GRUB had many virtues, but it became old and its developers did yearn for more functionality, and thus did GRUB 2 come into the world.
GRUB 2 is a major rewrite with several significant differences. It boots removable media, and can be configured with an option to enter your system BIOS. It's more complicated to configure with all kinds of scripts to wade through, and instead of having a nice fairly simple
/boot/grub/menu.lst file with all configurations in one place, the default is /boot/grub/grub.cfg. Which you don't edit directly, oh no, for this is not for mere humans to touch, but only other scripts. We lowly humans may edit /etc/default/grub, which controls mainly the appearance of the GRUB menu. We may also edit the scripts in /etc/grub.d/. These are the scripts that boot your operating systems, control external applications such as memtest and os_prober, and theming./boot/grub/grub.cfg is built from /etc/default/grub and /etc/grub.d/* when you run the update-grub command, which you must run every time you make changes.
The good news is that the
update-grub script is reliable for finding kernels, boot files, and adding all operating systems to your GRUB boot menu, so you don't have to do it manually.
We're going to learn how to fix two of the more common failures. When you boot up your system and it stops at the
grub> prompt, that is the full GRUB 2 command shell. That means GRUB 2 started normally and loaded the normal.mod module (and other modules which are located in /boot/grub/[arch]/), but it didn't find your grub.cfg file. If you see grub rescue> that means it couldn't find normal.mod, so it probably couldn't find any of your boot files.
How does this happen? The kernel might have changed drive assignments or you moved your hard drives, you changed some partitions, or installed a new operating system and moved things around. In these scenarios your boot files are still there, but GRUB can't find them. So you can look for your boot files at the GRUB prompt, set their locations, and then boot your system and fix your GRUB configuration.
GRUB 2 Command Shell
The GRUB 2 command shell is just as powerful as the shell in legacy GRUB. You can use it to discover boot images, kernels, and root filesystems. In fact, it gives you complete access to all filesystems on the local machine regardless of permissions or other protections. Which some might consider a security hole, but you know the old Unix dictum: whoever has physical access to the machine owns it.
When you're at the
grub> prompt, you have a lot of functionality similar to any command shell such as history and tab-completion. The grub rescue> mode is more limited, with no history and no tab-completion.
If you are practicing on a functioning system, press C when your GRUB boot menu appears to open the GRUB command shell. You can stop the bootup countdown by scrolling up and down your menu entries with the arrow keys. It is safe to experiment at the GRUB command line because nothing you do there is permanent. If you are already staring at the
grub> or grub rescue>prompt then you're ready to rock.
The next few commands work with both
grub> and grub rescue>. The first command you should run invokes the pager, for paging long command outputs:grub> set pager=1
There must be no spaces on either side of the equals sign. Now let's do a little exploring. Type
ls to list all partitions that GRUB sees:grub> ls (hd0) (hd0,msdos2) (hd0,msdos1)
What's all this
msdos stuff? That means this system has the old-style MS-DOS partition table, rather than the shiny new Globally Unique Identifiers partition table (GPT). (See Using the New GUID Partition Table in Linux (Goodbye Ancient MBR). If you're running GPT it will say (hd0,gpt1). Now let's snoop. Use the ls command to see what files are on your system:grub> ls (hd0,1)/ lost+found/ bin/ boot/ cdrom/ dev/ etc/ home/ lib/
lib64/ media/ mnt/ opt/ proc/ root/ run/ sbin/ srv/ sys/ tmp/ usr/ var/ vmlinuz vmlinuz.old initrd.img initrd.img.old
Hurrah, we have found the root filesystem. You can omit the
msdos and gpt labels. If you leave off the slash it will print information about the partition. You can read any file on the system with the cat command:grub> cat (hd0,1)/etc/issue Ubuntu 14.04 LTS \n \l
Reading
/etc/issue could be useful on a multi-boot system for identifying your various Linuxes.Booting From grub>
This is how to set the boot files and boot the system from the
grub> prompt. We know from running the ls command that there is a Linux root filesystem on (hd0,1), and you can keep searching until you verify where /boot/grub is. Then run these commands, using your own root partition, kernel, and initrd image:grub> set root=(hd0,1) grub> linux /boot/vmlinuz-3.13.0-29-generic
root=/dev/sda1 grub> initrd /boot/initrd.img-3.13.0-29-generic grub> boot
The first line sets the partition that the root filesystem is on. The second line tells GRUB the location of the kernel you want to use. Start typing
/boot/vmli, and then use tab-completion to fill in the rest. Type root=/dev/sdX to set the location of the root filesystem. Yes, this seems redundant, but if you leave this out you'll get a kernel panic. How do you know the correct partition? hd0,1 = /dev/sda1. hd1,1 = /dev/sdb1. hd3,2 = /dev/sdd2. I think you can extrapolate the rest.
The third line sets the
initrd file, which must be the same version number as the kernel.
The fourth line boots your system.
On some Linux systems the current kernels and initrds are symlinked into the top level of the root filesystem:
$ ls -l / vmlinuz -> boot/vmlinuz-3.13.0-29-generic initrd.img ->
boot/initrd.img-3.13.0-29-generic
So you could boot from
grub> like this:grub> set root=(hd0,1) grub> linux /vmlinuz root=/dev/sda1
grub> initrd /initrd.img grub> boot
Booting From grub-rescue>
If you're in the GRUB rescue shell the commands are different, and you have to load the
normal.mod andlinux.mod modules:grub rescue> set prefix=(hd0,1)/boot/grub grub rescue>
set root=(hd0,1) grub rescue> insmod normal grub rescue> normal
grub rescue> insmod linux grub rescue> linux /boot/vmlinuz-3.13.0-
29-generic root=/dev/sda1 grub rescue> initrd /boot/initrd.img-3.13.0-
29-generic grub rescue> boot
Tab-completion should start working after you load both modules.
Making Permanent Repairs
When you have successfully booted your system, run these commands to fix GRUB permanently:
# update-grub Generating grub configuration file ... Found background:
/usr/share/images/grub/Apollo_17_The_Last_Moon_Shot_Edit1.tga
Found background image: /usr/share/images/grub/Apollo_17_The_Last_Moon_Sho
t_Edit1.tga Found linux image: /boot/vmlinuz-3.13.0-29-generic
Found initrd image: /boot/initrd.img-3.13.0-29-generic Found linux image:
/boot/vmlinuz-3.13.0-27-generic Found initrd image: /boot/initrd.img-3.
13.0-27-generic Found linux image: /boot/vmlinuz-3.13.0-24-generic Found
initrd image: /boot/initrd.img-3.13.0-24-generic Found memtest86+ image:
/boot/memtest86+.elf Found memtest86+ image: /boot/memtest86+.bin done
# grub-install /dev/sda Installing for i386-pc platform. Installation
finished. No error reported.
When you run
grub-install remember you're installing it to the boot sector of your hard drive and not to a partition, so do not use a partition number like /dev/sda1.But It Still Doesn't Work
If your system is so messed up that none of this works, try the Super GRUB2 live rescue disk. The official GNU GRUB Manual 2.00 should also be helpful.
No hay comentarios:
Publicar un comentario